vn usa cn

Hỗ trợ khách hàng

(+84) 8 543210 88
Email: sullairvietnam@gmail.com

Chọn bộ lọc khí nén nội tuyến phù hợp

Không phải tất cả khí nén đều được tạo ra như nhau. Không phải tất cả các hệ thống khí nén.

Khí nén của bạn cần cung cấp lưu lượng, áp suất và mức chất lượng không khí theo yêu cầu của quy trình của bạn. Một hệ thống khí nén được thiết kế tốt sẽ cung cấp lượng khí đó một cách tiết kiệm nhất có thể. Một hệ thống được thiết kế kém sẽ bỏ lỡ một hoặc nhiều mục tiêu đó.

Vậy điều gì tạo nên một hệ thống nén khí được thiết kế tốt?

  • Máy nén khí cung cấp lưu lượng và áp suất.
  • Máy sấy khí nén cải thiện chất lượng không khí bằng cách loại bỏ độ ẩm.
  • Bộ lọc khí nén cải thiện chất lượng không khí bằng cách không chỉ loại bỏ một số độ ẩm mà còn cả các chất gây ô nhiễm khác.

Chất lượng không khí là gì?

Bộ lọc gió mặt bích dòng Sullair SX
Bộ lọc gió mặt bích dòng Sullair SX

Chất lượng không khí là thước đo lượng chất gây ô nhiễm có trong luồng không khí. Như đã đề cập ở trên, máy sấy khí nén có thể giúp loại bỏ một loại chất gây ô nhiễm - hơi ẩm. Nhưng cần phải lọc để loại bỏ các loại chất gây ô nhiễm khác khỏi đường dẫn khí của bạn.

Các loại chất gây ô nhiễm được loại bỏ bằng cách lọc

Hạt

Các hạt thường là các hạt rắn (ví dụ như bụi khô và ướt, phấn hoa và rỉ sét do ăn mòn đường ống) và các giọt chất lỏng lớn.

Bình xịt

Aerosol bao gồm cả sol khí dầu và các giọt nước nhỏ hơn.

Hơi

Hơi chủ yếu bao gồm dầu và các hydrocacbon khác ở thể khí.

Mức độ lọc khí nén

Mức chất lượng không khí cho tất cả các ứng dụng khí nén có thể được xác định bằng các loại chất lượng không khí trong tiêu chuẩn ISO 8573-1: 2010. (Xem bài đăng “Các cấp chất lượng không khí của ABC và 1-2-3” để biết chi tiết về các cấp và cấp chất lượng không khí.) Tiêu chuẩn này quy định các mức ô nhiễm cho phép đối với từng loại chất gây ô nhiễm tại mỗi cấp chất lượng không khí. Để đáp ứng các cấp độ này, bạn cần sử dụng đúng loại lọc gió với các cấp độ lọc phù hợp.

Types of compressed air filters

Particulate filters

Particulate filters remove particulates from the air stream by trapping contaminants on the media. The filter element design and material determine the size of the particles it can trap, so particulate filters have varying degrees of filtration.

Coalescing filters

Coalescing filters remove water and aerosols of liquids like oil by coalescence. Coalescence is the process of trapping smaller droplets along the media until they combine into larger drops that fall out of the air flow. The structure and type of media determine how much aerosol can be removed, so they also have varying degrees of filtration.

Combo particulate/coalescing filters

Một số thiết kế bộ lọc (ví dụ: bộ lọc mặt bích và ren dòng Sullair SX) hoạt động như cả bộ lọc hạt và bộ lọc kết hợp. Bạn chỉ cần một bộ lọc với một phần tử duy nhất để xử lý cả hai loại lọc.

Than hoạt tính

Bộ lọc than hoạt tính được sử dụng để loại bỏ dầu và hơi hydrocacbon khỏi khí nén và giảm lượng dầu chuyển sang 0,003 mg / m³. Các bộ lọc này thường được sử dụng nhất khi loại bỏ mùi vị hoặc mùi là quan trọng, ví dụ như chế biến thực phẩm và dược phẩm.

Mức độ lọc cho các bộ lọc hạt và liên kết

Bộ lọc không khí có ren dòng Sullair SX
Bộ lọc không khí có ren dòng Sullair SX

Thô

Bộ lọc hạt thô chỉ có thể loại bỏ các hạt lớn khỏi luồng không khí.

  • Tùy thuộc vào vật liệu lọc và thiết kế, các hạt nhỏ nhất mà chúng có thể loại bỏ sẽ có kích thước từ 5 đến 40 micron.
  • Các bộ lọc kết hợp thô có thể giảm lượng dầu chuyển xuống chỉ còn 5 mg / m³.

In most cases, coarse filters don’t provide high quality air. However, they can help remove moisture and keep large particles from fouling compressed air tools and instruments. (Unless those tools or instruments require higher quality air, of course.)

Fine

Typically, fine filters are the minimum size needed where applications or equipment need high quality air.

  • Fine particulate filters can remove particles as small as 1 micron.
  • Fine coalescing filters can limit oil carryover to .1 mg/m³.

Superfine/micro

Superfine filters are used when the highest quality air is needed; for example, for food production, pharmaceuticals, spray painting, and instrumentation.

  • Superfine (sometimes called micro) particulate filters can remove particles as small as .01 micron.
  • Superfine coalescing filters can limit oil carryover to .01 mg/m³.

Why not just use a single superfine filter? Or an active carbon one?

All degrees of filtration can collect larger particles and aerosols than they are optimized for. That might tempt you to just use filters with the highest degree of filtration needed—but you shouldn’t.

When filtering larger contaminants with finer filters, the buildup and loss of efficiency can happen much more quickly. (An active carbon filter could become clogged in hours, for example.) This can lead to unnecessary costs for replacement elements.

When should I replace my filter elements?

All filter elements have a maximum usable saturation point and eventually need replacing. Over time, contaminants build up on filter elements (including coalescing filters, as some solid particles, however small, are always present). Eventually, this buildup reduces the efficiency of the element. This efficiency loss causes larger pressure drops and allows more contaminants to pass through.

You shouldn’t try to save money by delaying or not replacing elements. If you don’t replace filter elements once they reached their maximum useable saturation point, your overall production costs could increase in three ways:

  • Increased energy costs by requiring your compressor to run at a higher pressure set point.
  • Increased production costs caused by additional contaminants ruining finished goods
  • Increased equipment capital and/or maintenance costs by additional contaminants damaging equipment

Typical filtration in compressed air systems

These typical filtration examples for compressed air systems assume combo particulate/coalescing filters unless otherwise noted.

System without dryers

In systems without dryers, install a coarse or fine filter immediately after the compressor.

  • Use a coarse filter if it meets both your particulate and aerosol requirements per ISO 8573-1:2010.
    • Even if your processes don’t need to reach a particular ISO class, installing a coarse filter to remove excess particulates and oil can help protect your air tools.
  • Use a fine filter if the coarse filter doesn’t meet both requirements.

If you need a stricter level of filtration, add a superfine filter after the fine filter.

Systems using refrigerated dryers

In systems using a refrigerated dryer, install a fine filter between the compressor and the dryer.

If you need a stricter level of filtration, install a superfine filter after the dryer.

If an active carbon filter is needed, install it after the superfine filter.

Systems using desiccant dryers

In systems using a desiccant dryer, install a fine filter between the compressor and the dryer.

If you need a stricter level of filtration, install a superfine filter between the fine filter and the dryer.

  • You should consider installing the superfine filter even if you don’t need to meet a superfine filtration level. By removing more contaminants before the air reaches the desiccant bed, you can extend the life of the desiccant.

Immediately after the dryer, you should install a fine particulate filter (e.g. the Sullair SX, FXFRHT and FWFRHT particulate series filters) to remove any dust coming off the desiccant bed.

  • You could install a combo filter instead, but no additional aerosols will be added by the desiccant bed. Therefore, a combo element would add an unnecessary expense.

If an active carbon filter is needed, install it after the fine particulate filter.

But how much filtration does my system need?

While typical filtration arrangements can serve as guidelines, your filtration should always be designed for your process needs. Too little filtration and the air stream could contain too many contaminants to provide the correct quality of air. Too much filtration and you could be paying more for your compressed air system and its upkeep than you need to.

Vì quá trình lọc phụ thuộc vào nhu cầu cụ thể của các quy trình và thiết bị của bạn, bạn nên tham khảo ý kiến ​​của chuyên gia hệ thống khí nén tại địa phương để được trợ giúp trong việc thiết lập bộ lọc cho hệ thống khí nén của bạn.

Tệp đính kèm

  • Chọn bộ lọc khí nén nội tuyến phù hợp

Thích những gì bạn đọc? Chia sẻ nó!
  • Chia sẻ
  • tiếng riu ríu
  •  
xử lí không khí

Bài đăng gần đây

  Các ứng dụng Ian Cass và Marie Kerrelle | Ngày 26 tháng 7 năm 2021

Bạn cần hỗ trợ
LIÊN HỆ CHÚNG TÔI NGAY